Menu

Topics

© 2012 BlogName - All rights reserved.

Firstyme WordPress Theme.
Designed by Charlie Asemota.

Convert a 273 auto into a 271 manual transfer case

June 30, 2014 - Author: bartbarton

I have a 2007 1/2 ton Dodge with the 5.7L 4WD

Question:  Is it possible to economically  np271convert a 273 auto into a 271 manual transfer case? I have a truck build that is requiring me to go manual, yet I own a full drive train with the auto case.

Answer:  Yes the 273 can be changed to a manual shift. This would require a front case, range fork and shift cam change we can provide these parts your cost is $430.00 plus S&H.

Or we can build a NP271 your cost is $866.66 exchange $250 core charge plus S&H.

Give Scott a call toll free 888-824-2012 he can help you with the technical aspects of this conversion and getting the correct parts the first time.  You can see the other parts we can provide for the NP271 on our site.

 

No Comments - Categories: NP271 Transfer Case Manual Shift

Input Bearing NV3500 GM 5 Speed Manual Transmission

- Author: bartbarton

I have a GMC G20 Van wiith 6.5L turbo diesel 1998.

Question:  This truck has the GM NV3500HD; Bought this trans new in 2002 and installed into G20 Chev van. Now has 35k mi. It has developed a low “growl” when letting out the clutch in neutral. Pulled clutch shaft bearing and appears OK but will replace it anyhow. I need your part number to order this bearing; it is 23mm wide). Is there any other source of this “growl” in the NV3500HD that I need to attend to ?? I do not find any metal shavings collecting on the magnetic plugs, oil (Redline) is very clean and shifts are perfect. Thanks and advise.

Answer: your diagnosis is probable correct.  We can provide a new input bearing order our part number M802048 your cost is $15.50.

This unit should have an aluminum input bearing retainer and an internal slave cylinder inside the bellhousing. If this is the case you will need to change the bearing race, order our part number NP728109 your cost is $17.00 plus S&H. Give Scott a call 888-824-2012 he can help you.

You can see the other parts we can supply for your NV3500 on our site.

 

No Comments - Categories: NV3500 HM290 Dodge Chevrolet GMC

Need Automatic Transmission Rebuild 2003 Express Van

- Author: bartbarton

I have a 2003 Chevrolet 3/4 ton Express Van

Question:  I have 230,000 miles on this truck,the automatic  trans finally went out a few weeks ago, I live in Minnesota.  If I bring the trans in,would you rebuild it?Does your work include a rebuilt torque converter too?I’m not sure if you work directly with the consumer or if I would have to go through a shop.Please let me know.

Answer:   We can rebuild the automatic transmission with all the latest updates including a heavy duty torque converter your cost is $1795.00, transmission delivered and pickup at ournMN location.

Or if you would like we can remove, then rebuild and re-install the transmission at our shop in MN this will include shop supplies, flush the existing transmission cooling system, new transmission fluids your cost is $450. This transmission will have a 100,000 mile warranty.  Give Scott a call 888-824-2012 he can help you.

 

No Comments - Categories: Automatic Transmissions

ZFS650 2WD Transmission Conversion to 4WD

June 27, 2014 - Author: bartbarton

I have a 1999 Ford F350 7.3 L 2WD

Question:  Can I convert a Ford 2wd Zf S6-650 ZFS650_MTFRD059transmission to 4wd? Or would having a 4wd transmission require me to buy a new purpose built 4wd trans?

Answer:  We could supply you a rebuilt ZFS650 however it would be less expensive

To do the conversion. It’s a fairly common conversion you will need the following parts:

  • Our part number MWT1319-304-070 MAINSHAFT your cost $235.00
  • Our part number MWT1319-301-073 4X4 TAILHOUSINS $345.00
  • Our part number MWT0734-319-598 4X4 SEAL your cost $9.50 plus S&H.

If you need any additional technical help or help with the order just give Dan a call toll free 888-824-2012 he can help you. You can see the other parts we can supply for your ZF S650 manual Ford 6 speed transmission on our site.

 

 

No Comments - Categories: ZF S650 Chevrolet GM

Ford1999 M5R1 Manual Transmission Overhaul

June 26, 2014 - Author: bartbarton

I have a Ford XLT 1999 3.0L 2WD manual Transmission

Question:  I would like a price onbearing_rebuild_kit everything I will need to do a full rebuild except the gears trans . and do you offer a standard and a high quality pack on the bearings

Answer:   We can provide a professional bearing overhaul kit for your M5R1, the kit will include all major bearings (aftermarket high quality), gaskets, seals and syncro rings. Order our part number TRSBK247AWS. This kit has 1 piece 2nd gear syncro, 30 T 5th & reverse slider with both 5th and Rev slider have 30 teeth. Your cost on this kit is $316.56.

Its possible that the fork should be replaced not a bad idea, order the following parts:

  • ½ shift fork part number MWTE8TZ-7230A your cost is $23.69
  • ¾ shift fork part number MWTE8TZ-7231AR your cost is $31.19
  • Steel cover plugs rung $.94 each, you are correct they should be replaced plus S&H. This should be everything you need for the overhaul. It is possible once you have the unit open you may find damaged hard parts, let us know we can supply both new and good used part.

You can see the complete parts list for your M5R1 on our site.  If you need additional help once you have the unit open or help with the order give Scott a call 888-824-2012

 

No Comments - Categories: M5R1 M5R2

Slip Yoke for NP233 Front Output

June 24, 2014 - Author: bartbarton

I have a 2000 GMC Jimmy 4.3L 4WDnp233_transfer_case_image

Question:  Truck has a 233 Transfer case with a splined front output shaft. I would like to change the output shaft to something that I can put a yoke onto. I’ve heard that Jeep 231 transfer case front output shafts will work. Do you know if the jeep front output shaft from a 231 will fit my 233? If so, can you please tell me the price of the shaft?

Answer:   The NP231 output shaft will work for your application to install a slip yoke.  We can supply the NP231 transfer case parts you need for this upgrade including the front output shaft, yoke and seal your cost is $95.00 all good used parts.

To place order or for more technical information give Scott a call 888-824-2012 he can help you.  You can see the other parts we can provide for the NP233 transfer case on our site.

 

 

No Comments - Categories: Transfer Case

1988 Nissan Hardbody 5 Speed Manual Transmission

June 19, 2014 - Author: bartbarton

I have the Hardbody Nissan 2.4L 4WD

Question:  Transmission started FS5W71C-NIS003whining in 1st,2nd, 3rd. 4th gear normal, 5th gear a little whine. Oil change clear with no debris. Trans has 300,000 miles. What transmission do I have.  Is it worth repair or need replace, can you make a recommendation?

Answer:

Your transmission is a Nissan Hardbody model FS5W71C, you have a couple of options, the first is to purchase a rebuilt unit the second option

Is to rebuild or have your transmission rebuilt locally.

If you elect to purchase a rebuilt unit the correct part number is MTNIS003 your cost of this factory built dyno tested unit is $ 1366.67 plus a $350.00 core deposit plus freight.

The factory rep has put together a list of probable parts that you will want to replace if you elect to overhaul the existing unit. See list below S&H will be added.

If you need more technical information give Scott a call toll free 888-824-2012 he can help you, he can also help with the order.

Bearing Rebuild Kit with Synchro Rings 4wd Hardbody (86-8/89) (2.4L) (1 Piece 2nd Synchro, no Synchro for Reverse) MWTBK212WS $153.50

 

36 5th Gear Set (21 T, 39 T) (4wd) (86-93) (Non Synchronized Reverse) (ring not included) NIS-5 $166.67

 

55 Reverse Idler Gear (21 T) (11/85-Up) NIS-10A $30.21

 

Reverse Gear Kit (86-93) (Non Synchronized Reverse) TRS-303587K $184.05

 

 

No Comments - Categories: FS5W71 Nissan Car & Pickup, Uncategorized

Need Ford FM146 2WD Transmission Bronco II

- Author: bartbarton

I have a 1989 Bronco II 2.9L V6 2WD

Question:   I’m looking for a FM146 FM146_MTFRD011transmission, and a price.

Answer:  We can provide a rebuilt dyno tested Ford FM146 manual transmission with all new bearings, gaskets, seals and syncro rings. Order our FM146 manual transmission part number MTFRD011 your cost is $933.33 plus a $250 core deposit plus freight. This transmission will have a 12 no hassle warranty.

For additional technical information or to place the order give Scott a call toll free 888-824-2012 he can help you.

 

No Comments - Categories: FM 145 FM146 Ranger Mistsubishi

Need Manual Transmission for Mustang 1996

June 18, 2014 - Author: bartbarton

I have a 1996 Ford Mustang 3.8 L T5-_mtfrd033

Questions:  I am looking for a rebuilt 5-Speed Manual Transmission for V-6 Mustang can you help?

Answer:   We can provide a factory rebuilt T5 manual transmission for your application.

Order our part number MTFRD033 your cost is $1000 EXCHANGE $350 Core deposit. This transmission has a 12 month hassle free warranty. Shipping charges will be added.

 

No Comments - Categories: T5 Manual Transmission

2006 GMC Yukon Denali AWD Front Differential Carrier Replacement

June 17, 2014 - Author: bartbarton

I have a Yukon Denali model year 2006 with the 6.0L AWD

Question:  Which one of your front differentials gm8.25_centersectionwould fit a 2006 GMC Yukon Denali AWD with 3:73 gears?

Answer:  We can provide a rebuilt front differential assembly for your 2006 GMC Yukon Denali AWD with 3:73 gears. Order our part number MWT 440-01362, your cost is $862.50 exchange $250 core deposit plus freight. This unit is factory built and has a 12 month no hassle warranty. The rebuilt unit will include all new high quality bearings, gaskets, seals and ring and pinion gear. The ring and pinion will be 3.73 ratio and built from 8620 steel, C&C machined to exact tolerances.

For additional information or to place the order give Scott a call toll free 1888-824-2012 he can help you.

 

No Comments - Categories: Front Differential Carrier Sections