Menu

Topics

© 2012 BlogName - All rights reserved.

Firstyme WordPress Theme.
Designed by Charlie Asemota.

NV4500 to Fit my 1989 Gas 3/4 ton Dodge is on available?

March 19, 2014 - Author: bartbarton

I have a 1989 Dodge 3/4 ton automatic transmission and 4WD.

Question:  I know the NV4500 was used in the diesel nv4500_newversion of this Dodge can you supply a transmission that will go behind my 360 gas engine?

Answer:  We can supply a brand new NV4500 for you gas application, its our part number MTCRY014N your cost is $1695.00 outright price no core required. You will also need:

Bell Housing your cost $245.00

Shift Stick your cost $55.00

Plus freight, your transfer case has a 23 spline input and will bolt up to the new NV4500.  This unit has a 12 month unlimited mileage warranty.  You can see the order units and NV4500 parts we offer on our site.

No Comments - Categories: NV4500 5 Speed Chevrolet Dodge GMC

Specifics of Dodge NV4500 Cryogenic Upgrade

March 8, 2014 - Author: bartbarton

How to Toughen up a 2000 Dodge 5.9L Diesel NV4500 Transmission

We would recommend that the weak areas of the nv4500_newNV4500 be treated and not the entire gear pack off of the main shaft. This is what we recommend.  Cryo treat the following:

  • Cluster gear weight 24 Lbs
  • 3RD GEAR weight 4.10 Lbs
  • Input Shaft  6 Lbs
  • 5TH Main Shaft Gear  1.4 Lbs

That’s a total of 32 Lbs at $10.00 per pound so $320 to cryo treat

We will disassemble and reassemble the shaft for an additional $65.00

There is no need to do 1/2/R gears as they never break, also there isn’t a main shaft breakage issue either

One other thing to consider is if the NV4500 transmission already has the updated main shaft in it or not. If it does not this would be the time to update that also as the 5th gear nut issue (5th gear backing off) would want to be addressed when it is apart. The cost of the new updated main shaft is $199.95

A second option is we can supply a brand new OE. transmission with the cryo treated gears mentioned above that would have the updated main shaft and the updated cast iron ext housing for $2100 outright plus freight and you could keep your old NV4500 trans for a spare or to sell it on ebay for parts.  See the other manual transmissions and parts we offer on our site.

No Comments - Categories: NV4500 5 Speed Chevrolet Dodge GMC

I need a Stronger NV4500 5 Speed Transmission

March 7, 2014 - Author: bartbarton

I have a Dodge 2500 1998 with the 5.9 Cummins Diesel.

Question:  I am looking to beef up my transmission.  I have had quite a few counter shaft failures (3rd gear)  How much does the Cryo run?  Can I just send the shafts and gear for the cryogenic  treatment?

Answer:  Yes we can cryo trcryoeat just the parts you need to be stronger.  By cryogenic treating the parts you can increase the strength of the part by as much as 30%.  The charge for this service is $10.00 per pound plus S&H.  Once the parts are treated we will provide you an estimate for the assembly it will be a minor charge.

You can see the other parts that we can supply for the NV4500 on our site.

No Comments - Categories: NV4500 5 Speed Chevrolet Dodge GMC