© 2012 BlogName - All rights reserved.

Firstyme WordPress Theme.
Designed by Charlie Asemota.

1968 Corvette T5 of T5WC

June 4, 2015 - Author: bartbarton

I have a 1968 Corvette.

Question:  I’m looking to drop a T-5 in my 68 vet. Was T5NWC_MTFRD033looking for a world class 1352-176, -182, -196, or -213. They all should be about the same. Was also wondering what kind of torque they are rated for. The engine I am running is a mild 327 with a rear gear of 3.08. I’ve seen some rated for 300 ft lb of torque and others for 600 ft lb torque. I don’t want to tear it up. I see that most of these sat behind a 5.0 liter F-body so I would think they would work behind a 327 with about 350 Hp.

Answer:   The T5 will be a little light for the 327CID with 350 HP it will work if driven only  and not a drag race car.

You would want the T5 Camaro World Class unit and this would have the mechanical speedometer provision required. There would be drive shaft mod’s, cross member mod’s and poss tunnel mods to be made

These are hard transmissions to come by but we could find and rebuild one cost would be $1700 outright no core required, plus freight. Give Scott a call toll free 888-824-2012 he can help you. You can find a complete list of transmission, rebuild kit and hard part for T5 transmissions on our site.


No Comments - Categories: T5 Manual Transmission

T5 5 Speed for Hot Rod

January 19, 2015 - Author: bartbarton

The transmission I am looking for is a T5WC, that came from a 1987 S10 pickup.

Question: I am looking for a world class T5 with the T5_manual_transshifter in the forward most position it was offered. That is right at the VERY front of the tailshaft housing,with the long tailshaft (looks like a powerglide tail-long),it is for a hotrod build so these and front bolt pattern are are most needed specs. a mechanical speedo tailshaft would be a dream. It is for a model/v8 flathead, so shifter must be forward as possible.

Answer:   We can provide a re manufactured T5 S10 world class with a mechanical speedometer with a 12 month warranty your cost is $1250.00 outright, plus freight, with 1 week to ship date.  This transmission has a 12 month warranty

You can see the other parts that we can provide for the T5WC manual transmissions.



No Comments - Categories: T5 Manual Transmission, Uncategorized

Need Manual Transmission for Mustang 1996

June 18, 2014 - Author: bartbarton

I have a 1996 Ford Mustang 3.8 L T5-_mtfrd033

Questions:  I am looking for a rebuilt 5-Speed Manual Transmission for V-6 Mustang can you help?

Answer:   We can provide a factory rebuilt T5 manual transmission for your application.

Order our part number MTFRD033 your cost is $1000 EXCHANGE $350 Core deposit. This transmission has a 12 month hassle free warranty. Shipping charges will be added.


No Comments - Categories: T5 Manual Transmission